Username or Email Address
Do you already have an account?
Forgot your password?
  • Log in or Sign up


    Results 1 to 9 of 9

    Thread: P0106 and P0237

    1. Member StevenPirre's Avatar
      Join Date
      Mar 3rd, 2009
      Location
      CT
      Posts
      352
      Vehicles
      01 GTI 1.8t
      01-31-2010 02:41 PM #1
      Whats the deal?

    2. Member StevenPirre's Avatar
      Join Date
      Mar 3rd, 2009
      Location
      CT
      Posts
      352
      Vehicles
      01 GTI 1.8t
      01-31-2010 03:59 PM #2
      Anyone?

    3. 01-31-2010 05:13 PM #3
      P0106= Manifold Abs.Pressure or Bar.Pressure Range Performance
      P0237= Turbocharger Boost Sensor (A) Circuit Low Input
      To help you I will need more information from you like how the car is running, gas mileage, ect. I hope this helps for now.

    4. Member
      Join Date
      Sep 27th, 2009
      Posts
      296
      Vehicles
      GTI 1.8T AUQ
      01-31-2010 06:41 PM #4
      P0106 - Manifold / Barometric Pressure Sensor (G71) / (F96): Implausible Signal
      Possible Symptoms
      * Erratic Idle

      Possible Causes
      * Wiring and/or Connections from/to Manifold/Barometric Pressure Sensor (G71)/(F96) faulty
      * Leak in Air Intake and/or Exhaust
      * Manifold/Barometric Pressure Sensor (G71)/(F96) faulty
      * Engine Control Module faulty

      Possible Solutions
      * Check Engine Control Module Software Version
      o See Special Notes for Details
      * Check Timing
      o See Special Notes for Details
      * Check Wiring and/or Connections from/to Manifold/Barometric Pressure Sensor (G71)/(F96)
      * Check for Leak in Air Intake and/or Exhaust
      * Check/Replace Manifold/Barometric Pressure Sensor (G71)/(F96)
      * Check/Replace Engine Controle Module

      Special Notes
      * On certain smaller Engines we've seen cases where a buggy Engine Control Unit Firmware can cause these fault codes, additionally there are known Problems with the Timing Chain Tensioners which can also result in these fault codes. Please refer to the related TPL/TSB for more instructions.

      P0237 - Manifold Pressure / Boost Sensor (G31): Signal too Low
      Possible Symptoms
      * Malfunction Indicator Lamp (MIL) active

      Possible Causes
      * Manifold Pressure / Boost Sensor (G31) Power Supply faulty
      * Manifold Pressure / Boost Sensor (G31) faulty

      Possible Solutions
      * Check Manifold Pressure / Boost Sensor (G31) Power Supply
      * Check Manifold Pressure / Boost Sensor (G31)


    5. 01-31-2010 06:57 PM #5
      I like how you copied the Ross-Tech Wiki. Did you copy and paste or type all that?

    6. Member Vdubed13's Avatar
      Join Date
      Jun 6th, 2008
      Location
      WEST VIRGINIA
      Posts
      5,624
      Vehicles
      Bagged -Big Turbo -MK4 and Slammed B6 A4 1.8TQ
      01-31-2010 09:04 PM #6
      i had the same problem its the MAP sensor!!

    7. 03-29-2010 07:00 PM #7
      did the MAP sensor solve your problem Steve?

    8. 04-03-2010 01:54 AM #8
      i replaced my MAP today and have no issues .. both 106 and 237 gone.

    9. Member StevenPirre's Avatar
      Join Date
      Mar 3rd, 2009
      Location
      CT
      Posts
      352
      Vehicles
      01 GTI 1.8t
      06-27-2011 07:11 PM #9
      so almost a year later I still can't figure my codes out. I replace the map sensor and I still have the code. I check the voltage off the map harness and its over 5v. The middle connector has no voltage however. What's the problem?

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •