After spending days searching for how-to's or guides for this I'm just going to pop the question;
Is there any how-to or guide on the interwebs on how to wire a VR6 ODB1 harness to a CE1 fusebox ?
I've put a VR6 turbo into my MK2 Jetta (1984) and the next thing to do is the wiring. Apparently I have the "worst case scenario" being a CE1 car and OBD1 engine.
Almost every post/guide/how-to I found was on MK2 VR6 swaps using CE2 fuse boxes, MK3 clusters,... & with a OBD2 harness. No relevant information on a OBD1 to CE1 conversion .
The engine is already completely (re)build & I will be running a standalone ECU which will be wired using an OEM ecu connector (pinned out). No big changes should be needed to the harness except for the connection to the fusebox.
Switching to CE2 fusebox and other internal cabling is not an option for me, I would like to keep this as is being CE1.
I know most of you would recommend renewing all the wiring; due to my lack of experience & knowledge I'm not able to do this myself so for now, the OEM wiring will be used.